Formlabs Form 4
Add a Formlabs Form 4 using your site connection and verify resin matching.
All printer models · Formlabs connection setup
Ask support to confirm your site’s Formlabs Connection is ready before adding this printer.
Add the Form 4
- Open Printers → Add Printer and enter a recognizable name.
- Choose the physical Site and select Formlabs Form 4 from Production.
- Select the site’s Formlabs Connection, then the matching device under Printer Serial.
- Save. Confirm the status updates and the loaded resin matches the physical printer.
- Prepare a .form file for this model in PreForm, upload it, and review its resin requirement before approving a test print.
If the device is missing from the picker, check the site and exact model. See Formlabs discovery help.
What to expect
This model supports camera snapshots through Formlabs Dashboard. The images are periodic stills, so check the capture time.
Status can arrive later than it appears on the printer. Pluraprint does not offer pause, resume, or stop for this model; use the printer’s controls if intervention is needed.
The resin requirement is fixed by the print file. Resolve unknown resins through Material Mapping before queueing. Follow Formlabs’ instructions for physically loading resin and preparing the build platform.